 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Model 100 Vishay Spectrol 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer FEATURES * Gangable up to 6 sections * Extra taps on request * Bushing and servo mount types available * Ohmic value range: 5 up to 35 k RoHS COMPLIANT ELECTRICAL SPECIFICATIONS PARAMETER Total Resistance: Tolerance: 50 and Above Below 50 End Voltage Linearity (Independent): 5 to 100 100 to 500 500 to 3 k 3 k to 15 k 15 k and above Noise Electrical Angle Power Rating Insulation Resistance Dielectric Strength Taps (Extra) Phasing Absolute Minimum Resistance STANDARD 5 to 20 k 3% 5% SPECIAL to 35 k 1% 3% Linearity x total applied voltage for total resistance above 20 . 2.0 % of total applied voltage for 20 and below STANDARD 1.0 % 0.5 % 0.5 % 0.5 % 0.5 % 352 2 2.75 W at 40 C ambient 100 M min, 500 VDC 1000 VRMS, 60 Hz Up to 13 (position tolerance: 1) CCW taps of multiple sections aligned with CCW tap of section 1 to 1 Linearity x total resistance or 0.5 , whichever is greater BEST PRACTICAL 0.50 % 0.35 % 0.25 % 0.20 % 0.15 % 100 ENR (MIL-R-12934) ORDERING INFORMATION/DESCRIPTION The Model 100 can be ordered from this data sheet with a variety of alternate characteristics, as shown. For most rapid service on your order, please state: 100 MODEL S MOUNTING TYPE B: Bushing S: Servo 1 NUMBER OF SECTIONS Up to 6 sections 10K OHMIC VALUE BO1 PACKAGING Box of 1 piece Other characteristics will be standard as described on this data sheet. If special characteristics are required, such as: special linearity tolerance, special resistance tolerance, extra taps, non-linear functions, etc., please state these on your order and allow additional lead time for delivery. SAP PART NUMBERING GUIDELINES 100 MODEL B STYLE Bushing 2 NUMBER OF SECTIONS 203 OHMIC VALUE Section NO 1: 20K 502 OHMIC VALUE Section NO 2: 5K B01 PACKAGING Box of 1 piece www.vishay.com 80 For technical questions, contact: sfer@vishay.com Document Number: 57034 Revision: 28-Jun-07 Model 100 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer DIMENSIONS in inches (millimeters) BUSHING MOUNT: 100B... 1 0.010 0.031 Vishay Spectrol 0.705 (17.91) 0.875 (22.22) 0.375 (9.52) 0.031 3 + 0.0000 - 0.0010 0.242 MIN. (6.15) 0.062 (1.57) 22 1/2 TYP. 1 2 O 0.4062 MTG. (10.32) 0.2497 (6.34) + 0.0000 - 0.0003 0.875R (22.22) MAX. O 1.312 (33.32) 0.562 (14.27) 0.031 0.062 (1.57) MTG. FACE 3/ 8 - 32 UNEF 2A O 0.125 (3.18) SERVO MOUNT: 100S... 0.010 0.031 1 0.562 0.800 (20.32) (14.27) 0.073 (1.85) 0.062 (1.57) 0.062 (1.57) - 0.0003 O 0.2497 (6.34) + 0.0000 - 0.0005 + 0.0000 0.337 MIN. (8.56) 2 1 3 CW SCHEMATIC O 1.312 (33.32) O 1.1875 O 1.312 (30.16) (33.32) MTG. 1 ADD 0.566 0.002 (14.38) FOR EACH ADDITIONAL SECTION O 1.187 (30.15) MAX. MTG. FACE TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS 0.005 ANGLES 2 MECHANICAL SPECIFICATIONS PARAMETER Rotation Bearing Type Ganging Torque (Maximums) Servo, 1 Section Bushing, 1 Section Each Additional Section Mechanical Tolerances (Maximums): Shaft Runout (TIR/In) Pilot Dia. Runout (TIR) Lateral Runout (TIR) Shaft End Play Shaft Radial Play Moment of Inertia Weight Single Section Each Additional Section Document Number: 57034 Revision: 28-Jun-07 360 (continuous) Servo mount: Ball bearing Bushing mount: Sleeve bearing 6 sections maximum, terminal alignment, added sections, within 10 of section 1 terminals STARTING 0.60 oz. - in (43.20 g - cm) 1.00 oz. - in (72.00 g - cm) 0.30 oz. - in (21.60 g - cm) BUSHING 0.002" (0.05 cm) 0.002" (0.05 cm) 0.005" (0.13 cm) 0.005" (0.13 cm) 0.004" (0.10 cm) 1.0 g - cm2 per section maximum 2.0 oz. maximum (56.7 g) 0.75 oz. maximum (21.3 g) For technical questions, contact: sfer@vishay.com www.vishay.com 81 RUNNING 0.30 oz. - in (21.60 g - cm) 0.75 oz. - in (54.00 g - cm) 0.30 oz. - in (21.60 g - cm) SERVO 0.002" (0.05 cm) 0.002" (0.05 cm) 0.002" (0.05 cm) 0.005" (0.13 cm) 0.002" (0.05 cm) Model 100 Vishay Spectrol 1 5/16" (33.3 mm) Single Turn Wirewound Precision Potentiometer ENVIRONMENTAL SPECIFICATIONS Vibration Shock Salt Spray Rotational Life Load Life Temperature Range 15 g thru 2000 CPS 50 g 96 h 1 million shaft revolutions 900 h - 55 C to + 105 C MATERIAL SPECIFICATIONS Housing and Lids Shaft Terminals Bushing Mount Hardware Lockwasher Internal Tooth: Panel Nut: Aluminum, anodized Stainless steel, non-magnetic non-passivated Brass, plated for solderability Steel, nickel plated Brass, nickel plated MARKING Unit Identification Units shall be marked with Vishay Spectrol name, model number and data code and on each section, resistance, resistance tolerance, linearity and terminal identification POWER RATING CHART RESISTANCE ELEMENT DATA RESISTANCE VALUES () 5 10 20 50 100 200 RESOLUTION (%) 0.346 0.298 0.236 0.244 0.222 0.181 0.178 0.138 0.105 0.085 0.069 0.058 0.058 MAXIMUM MAXIMUM OHMS CURRENT VOLTAGE AT 70 C ACROSS PER COIL TURN AMBIENT (V) (mA) 0.017 0.030 0.047 0.122 0.222 0.361 0.885 1.38 2.09 4.23 6.84 11.5 20.0 742 524 371 235 166 117 74 52 37 23 17 12 8.8 3.7 5.2 7.4 12 17 23 37 52 74 117 166 235 310 WIRE TEMP. COEF. (ppm/C) 800 800 800 20 20 20 20 20 20 20 20 20 20 RATED POWER IN W 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 500 1K 2K 5K 10K 20K 35K AMBIENT TEMPERATURE IN C www.vishay.com 82 For technical questions, contact: sfer@vishay.com Document Number: 57034 Revision: 28-Jun-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of 100B110KBO1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |